JCB's E-TECH portfolio now covers most common site tasks, from a 1-tonne micro excavator to articulated booms reaching 18.3m. Each machine produces zero emissions at the point of use, typically runs more quietly than a diesel equivalent and requires less routine maintenance.

The guide details every E-TECH model available through Scot JCB, including battery sizes, charging times and headline performance figures.

The E-TECH Range At A Glance

- 8008E CTS micro excavator: 1,006kg, 1.69m dig depth; 9.9kWh battery; 20–80% in about 3 hours on 230V.

- 19C-1E mini excavator: 1,902–2,037kg, 2.82m dig depth; 19.8kWh; 0–100% in about 2.5 hours on 415V.

- Teletruk 30-19E / 30-22E / 35-22E: 3,000–3,500kg lift, 4.0–4.4m lift height; 80V system; batteries swap in roughly 2 minutes.

- HTD-5E dumpster: 500kg carry, 706mm wide; 4.9kWh; 20–80% in around 73 minutes.

- 1TE site dumper: 1,000kg payload, high tip; 10kWh; 0–100% in about 1 hour 40 minutes on 415V.

- 3TE site dumper: 3,000kg payload, swivel tip; 20kWh; roughly 2 hours to full on 415V.

- 525-60E Loadall telehandler: 2,500kg, 6.0m lift; 24kWh; approx. 8 hours to charge on 240V.

- 403E wheeled loading shovel: 0.5m³ shovel, 2,729kg; 20kWh; under 2 hours to full on 415V.

- A45E / A60E articulated booms: 13.84m / 18.3m platform heights; 48V systems; offered as full electric or hybrid.

- S1932E to S4550E scissor lifts: 5.71–13.8m platform heights; 24V; charge via 100–240V.

- Electric Powerpacks: 23–104kWh storage; 8–36kW output for zero-emission site power.

Electric Versus Diesel: Headline Comparisons

- 8008E CTS vs 8008 CTS: same 1.69m dig depth and 9.3kN bucket tearout; around 9dB quieter; electric weighs 1,006kg vs 950kg.

- 19C-1E vs 19C-1: matches 18kN bucket tearout; operator noise down 10dB and external noise down 6dB; electric weighs 1,902–2,037kg vs 1,830–1,910kg.

- Teletruk 30-19E vs 30-19D: same 3,000kg max lift and 1,900kg at 2m; electric has a tighter 2,550mm turning radius (vs 2,885mm) but 4.0m lift vs 4.4m and 18kph vs 20kph.

- HTD-5E vs HTD-5: same 500kg capacity, 1.45m load over height and 706mm width; operator noise down 14dB; electric weighs 606kg vs 515–590kg.

- 1TE vs 1T-2 HT: 1,000kg payload, 307-litre skip, 11.9kph; electric weighs 1,625kg vs 1,515kg.

- 3TE vs 3T-2 ST: 3,000kg payload, swivel tip, 930-litre skip and same control layout; electric weighs 2,290kg vs 2,390kg.

- 525-60E vs 525-60 Hi-Viz: 2,500kg max lift, 6.0m lift height and same transport dimensions; 720kg at full reach vs 800kg for diesel.

- 403E vs 403: same 12.6–16kN breakout force, dump heights and 20kph top speed; operator noise about 69dB vs 86dB, external noise 85dB vs 101dB.

Why Consider Electric On Site?

- Zero tailpipe emissions: suitable for indoor, underground and low-emission zones.

- Lower noise: for example, the 403E reduces external noise from roughly 101dB (diesel 403) to about 85dB, aiding night work and on-site communication.

- Reduced servicing: no engine oil or fuel filters, maintenance-free batteries and fewer daily checks.

- Lower vibration: no diesel engine means less operator fatigue.

- Comparable performance: models such as the 19C-1E, HTD-5E and 525-60E match diesel equivalents on key figures.

Electric Micro & Mini Excavators

-- Advertisement --

- 8008E CTS micro excavator: 1,006kg, 1.69m max dig depth and 700mm retracted width. Up to 4.5 hours' continuous use from a 9.9kWh lithium-ion pack (typically more than a day's work). Charges 20–80% in around 3 hours at 230V or about 5.5 hours at 110V via the on-board charger. Matches diesel for dig depth and tearout while running around 9dB quieter.

- 19C-1E mini excavator: 1,902–2,037kg, 2.82m max dig depth. Four lithium-ion batteries (19.8kWh) deliver a full day on a charge. Charging: approx. 2.5 hours at 415V (0–100%), about 5 hours at 230V or around 10.5 hours at 110V (20–80%). Matches the diesel 19C-1's 18kN bucket tearout with lower noise. Best for work inside buildings, rear gardens, urban and out-of-hours jobs.

Electric Teletruks

The electric Teletruk keeps the side-mounted telescopic boom, so operators can reach into the second row and unload trailers from one side. A 2.2m cab height suits work in containers and trailers.

- 30-19E: 3,000kg lift, 1,900kg at 2m, 4.0m lift height.

- 30-22E: 3,000kg lift, 2,200kg at 2m, 4.4m lift height.

- 35-22E: 3,500kg lift, 2,200kg at 2m, 4.0m lift height.

- Runtime and battery swaps: a full eight-hour shift per charge; swap batteries in roughly 2 minutes for multi-shift duty. The 30-19E mirrors the diesel 30-19D on key lift figures and turns more tightly (2,550mm vs 2,885mm). Best for logistics, van/truck/container loading and 24/7 operations in noise-sensitive areas.

Electric Dumpsters

- HTD-5E: fully electric tracked dumpster usable walk-behind or ride-on. 500kg carry capacity, 1.45m load over height and 706mm width to pass through standard doorways. Typical 3–4 hours' use on a charge, extendable to about 8 hours with top-up charging. 20–80% in around 73 minutes from a 240V supply (110V, 240V and 3-pin options). Matches diesel for size and capacity with 14dB lower operator noise. Ideal for housebuilding, landscaping and indoor or night work.

Electric Site Dumpers

- 1TE: 1,000kg payload with high-tip skip for tipping directly into skips and containers. 10kWh battery supports a full day's shift. Charges to 20–80% in around 2 hours 35 minutes at 230V or 0–100% in about 1 hour 40 minutes at 415V.

- 3TE: 3,000kg payload with swivel tip, 20kWh capacity for a typical day's work. Mirrors diesel performance, and the 3TE keeps the same control layout as the 3T diesel. Suited to indoor projects, urban sites, enclosed spaces and night operations.

Electric Telehandlers

- 525-60E Loadall: electric version of JCB's compact telehandler for lifting indoors and in noise-restricted zones. 2,500kg max lift, 6.0m lift height and 2,000kg to full height. A 24kWh lithium-ion battery powers a full shift. Charges in roughly 8 hours from a standard 240V, 16A supply via the on-board charger and is fast-charge ready. Matches the diesel 525-60 Hi-Viz on core figures and size, with 720kg at full reach vs 800kg on diesel. Best for indoor material handling, urban and sensitive environments.

Electric Wheeled Loading Shovels

- 403E: compact electric loader for enclosed, underground and low-noise applications. 2,729kg operating weight, 0.5m³ shovel and up to 898kg payload with extra counterweight and pallet forks. A 20kWh battery supports a full shift. Charging is around 8 hours at 230V (20–80%) or under 2 hours at 415V (0–100%). Matches the diesel 403 on breakout force, dump heights and 20kph top speed while significantly cutting noise. Best for indoor, underground and noise-sensitive sites.

Access: Scissor Lifts And Articulated Booms

- Scissor lifts (S1932E to S4550E): five fully electric models with non-marking tyres, a 0.9m extension deck, pothole protection and basket power outlet. Platform heights span 5.71–13.8m and working heights 7.71–15.8m; load capacities range from 230–450kg depending on model. All run 24V systems and charge from 100–240V.

- Articulated booms (A45E / A45EH and A60E / A60EH): A45 versions offer a 13.84m platform height, 7.47m horizontal reach and 300kg capacity. A60 variants reach 18.3m with 11.9m horizontal reach and 300kg unrestricted or 454kg restricted capacity. Fully electric models use a 48V, 400Ah battery pack for zero-emission work; hybrid versions add a 14.8kW JCB Diesel by Kohler engine, with the A45EH capable of up to a week's standalone run time on remote sites. Well suited to both indoor and outdoor work at height for contractors and rental fleets.

Electric Powerpacks

- JCB Electric Powerpacks provide zero-emission site power and can charge E-TECH machines such as the 1TE. The five-model range (1.25QE to 3.100QE) offers 23–104kWh of storage and 8–36kW continuous output at 230V or 400V. With no fluids, filters or routine servicing, they run quietly around the clock and can operate in hybrid mode alongside a generator. Ideal for indoor/underground use, noise-sensitive locations and out-of-hours power.

Demos, Finance And Contact

Scot JCB can arrange a demonstration of any E-TECH machine so you can test performance on your work before committing. The team also partners with JCB Finance to build funding options tailored to your business.

Call 0141 556 6521, contact your local Scot JCB depot, or email [email protected].

Frequently Asked Questions

- How long do they take to charge? It varies by model and power supply. For example, the HTD-5E charges from 20–80% in around 73 minutes, the 19C-1E reaches 0–100% in roughly 2.5 hours on 415V, and larger models such as the 525-60E, 3TE and 403E typically charge overnight in about 8 hours at 230–240V.

- Will they last a full working day? Most E-TECH machines are designed for a full shift per charge. The 8008E CTS delivers up to 4.5 hours of continuous digging (more than a typical working day), and the HTD-5E's 3–4 hours of standard use can extend to about 8 hours with top-up charging.

- Do I need special power? No. Most models have on-board chargers for standard 110V or 230V supplies, with several also accepting 415V fast charging. On sites without mains, a JCB Electric Powerpack can supply charging.

- Are they as capable as diesel? On key stats, yes. The 19C-1E matches the diesel 19C-1's 18kN tearout, the HTD-5E equals the HTD-5's 500kg carry capacity, and the 525-60E mirrors the 525-60 Hi-Viz on 2,500kg lift and 6.0m height.

- Can I try before buying? Yes. Scot JCB can arrange demonstrations and works with JCB Finance on funding options. Call 0141 556 6521 or email [email protected].