Build Scotland Construction Directory
Time and date


Callsafe Contact Details

Click to view
01889 574320
Yardley House
11 Horsefair
County Staffordshire
WS15 2EJ
England UK

About Callsafe

Consultancy Services
Health & Safety Policy and Procedures
Current health and safety legislation progressively demands that safety procedures and safety plans are clearly documented.

To that end Callsafe Services Ltd is experienced in the preparation and development of the following:-

  • Company Safety Policy
  • Health and Safety Procedures
  • Permits to Work
  • Consultants can develop the permit to work system tailored to each company and covering such areas as:-
    • Confined Space Entry
    • Mechanical and Electrical Isolation
    • Hot Works
    • Excavation
    • Temporary Work
    • Works Commencement Certificates
  • Safety Handbooks
  • Safety Audits
  • Management Safety Audits
  • Consultants will visit the client’s premises and will evaluate the way in which the Company is structured with regard to the management of safety and health issues. The audit will consider such matters as;-
    • the existence and quality of the safety policy, published safety procedures and other safety instructions which may have been established.
    • the understanding that managers and non-supervisory staff have of their responsibilities towards accident prevention and occupational ill-health.
    • the way in which senior management monitor the company performance in safety and health.

    At the conclusion of each audit, a comprehensive report is submitted to the client.

  • Workplace Inspections
  • Risk Assessments
  • Safety legislation requires formal assessments to be carried out in a wide variety of areas. Callsafe Services Ltd provides expertise to make such assessments in areas such as:-
    • Work at heights
    • Traffic management
    • Working around and over water
    • Control of Substances Hazardous to Health (COSHH)
    • Manual Handling
    • Display Screen Equipment (Visual Display Units)
    • Noise
    • Workplace Health and Safety
    • Work Equipment
    • Asbestos
    • Fire

Note that this is a non-exhaustive list, please contact us for further information. All assessments are presented in a way which suits the client’s needs and if requested is carried out using the client’s risk assessment criteria and paperwork systems.

Specialist Services

Office Health Check
Even in high risk industries where the office environment is regarded as relatively safe and healthy, significant time is being lost due to accidents and occupational ill-health. Added to those risks is the ever present risk of fire.

Callsafe Services Ltd is experienced in conducting a wide range of audits and inspections and in steering employers towards a safe and healthy working environment.

Health and Safety for Small Contractors
This is a package designed to suit the needs of small contractors. It provides all of the elements required by small contractors relieving them of the nausea of health and safety paperwork leaving them free to run the business, whilst in no way reducing their involvement or authority. The package includes:-
  • Health and Safety Policy (writing or review)
  • Health and Safety Procedures (writing and amendment)
  • Health and Safety Training
  • Regular Site Inspection
  • General Support

Health and Safety for Construction Professionals
Outside of the office, the risks to construction professionals are under the control of contractors or others. This however does not relieve the management of those people of their duty to ensure their health and safety. This package for construction professionals provides the advice and support to assist in the execution of that duty. The package includes:-
  • Health and Safety Policy and Procedures (writing or review)
  • Health and Safety Site Audits and Inspections
  • Health and Safety Training
  • Office Audits

We currently supply the above services to construction client, designer and contractor organisations and facilities management. Our most significant current clients for these services are McDonald’s Restaurants Limited and McDonalds Europe, but other contractor and designer organisations are also supported, either as part of an annual support agreement or a specifically defined workscope.


Take a look at our Public Courses, In-house Courses and our E-Learning Courses!


CDM2015 and BIM Synergy

The Building Information Modelling (BIM) process requirements and the Construction (Design and Management) Regulations 2015 (CDM2015) requirements are very similar as to their needs and objectives.

If BIM systems are used on a project and they have not been integrated with the CDM2015 we will have missed a unique opportunity in the development of project, health & safety and asset management.

The Building Information Modelling (BIM) process should:
Create a common language applicable to all;
Allow decisions to be data driven via a single version of the truth;
Deliver benefits by using data and embracing efficient use of technology; and
Bring process, people and technology together.

BIM requires the following:
Employers Information Requirements (EIR);
BIM Execution Plans in response to the EIR; and
Information Delivery Table – clarifies the information to be exchanged on a project, data ownership and standards.

The Construction (Design and Management) Regulations 2015 (CDM2015) requires:
Understandable information supplied to all who need it at the right time, known as the Pre-Construction Information (PCI) within CDM2015;
Effective health and safety management from conceptual design, through detailed design, tendering, construction to commissioning and handover;
Design that is performed by an integrated team, with all interfaces addressed to create a complete design that has eliminated and reduced health and safety risks to a reasonably practicable level;
Effective cooperation, coordination and communication between all of the duty holders, the client, designers, the principal designer, contractors, the principal contractor, and other stakeholders;
An effective construction health and safety management system, known as the Construction Phase Plan (CPP) within CDM2015;
Useful information provided for the future use, maintenance, repair, cleaning, modification and demolition/dismantling, known as the Health and Safety File (HSF) within CDM2015, plus the other as-built and operational and maintenance information.

An example of the synergy between the requirements of BIM and the requirements of CDM2015 is the similar requirements for the EIR and those of the PCI. The following is an amended version of the EIR requirements contained in PAS 1192-2:2013, Specification for information management for the capital/delivery phase of construction projects using building information modelling.

Employers Information Requirements (EIR)
The EIR should contain:
The levels of detail required for information management, including when information is required, from whom and in what format, this will populate the Model Production and Delivery Table;
Any specific training requirements for operating the information management system, such as familiarisation with a particular software system;
Requirements for planning and reporting on work and the managing of the modelling process, if required, and naming conventions, etc.);
How design

Callsafe Serves The Following Areas

Burnside Plant Hire LtdWindow StoreSafe Access (Highland) Ltd.Stuart King Architecture & Design Ltd123vCoastworksEnvironmental Dust Solutions LtdMorris & Spottiswood LtdCharlie Cowie LTDBabbity Environmental
Terms and Conditions
2024/07/17 14:14:50